omreport

Command level 1 Command level 2 Command level 3 User privilege required Use
omreport
about U, P, A Shows version number and properties for the Server Administrator program.
chassis U, P, A Shows a general status for all main components.
acswitch U, P, A Shows failover settings where redundant power units are installed in a system.
bios U, P, A Shows BIOS facts such as manufacturer, version, date last updated.
biossetup U, P, A Shows BIOS setup properties that you have configured during system boot.
currents U, P, A Shows the status and thresholds for the current system sensors.
events U, P, A Shows chassis event information.
fancontrol U, P, A Shows properties you have set for fan speed.
fans U, P, A Shows status and thresholds for system fans.
firmware U, P, A Shows firmware properties such as version, date of last update, and whether the firmware is updatable.
info U, P, A Shows a status summary for main system chassis components.
intrusion U, P, A Shows the status of the system’s intrusion sensor(s).
leds U, P, A Shows the properties you have set for LEDs to flash under various alert conditions.
memory U, P, A Shows properties of your system’s memory arrays.
nics U, P, A Shows number of NICs installed in your system, NIC vendor, NIC description, IP address, and connection status.
ports U, P, A Shows properties for your system’s parallel and serial ports, such as I/O address, IRQ level, connector type, and maximum speed.
powerbutton U, P, A Shows the power button control settings.
processors U, P, A Shows properties of your system’s processors, including speed, manufacturer, and processor family.
pwrsupplies U, P, A Shows properties of power supplies.
slots U, P, A Shows properties of your system’s expansion slots and other slot types.
temps U, P, A Shows the status and thresholds for the system temperature sensors.
volts U, P, A Shows the status and thresholds for the system voltage sensors.
storage U, P, A See “omreport: Using the Storage Reports.”
system U, P, A Shows a high-level summary of system components.
alertaction U, P, A Shows warning and failure threshold values, as well as actions that have been configured when an essential components detects a warning or failure state.
alertlog U, P, A Allows the administrator to show the alert log.
assetinfo U, P, A Shows cost of ownership information for your system.
cmdlog U, P, A Allows the administrator to show the command log.
esmlog U, P, A Allows the administrator to show the hardware log.
events U, P, A Shows the system’s SNMP event settings.
operatingsystem U, P, A Shows the name and version of your operating system.
postlog U, P, A Shows your system’s POST log.
recovery U, P, A Shows how your system is configured to respond to a hung operating system.
shutdown U, P, A Shows how the shutdown action is to be performed.
summary U, P, A Shows key facts for all system components, including main system chassis, software, and storage.
thrmshutdown U, P, A Shows what shutdown action, if any, is to be taken when a temperature warning or failure condition is detected.
version U, P, A Shows a summary for all updatable components on your system.
rac U, P, A See “omreport rac: Viewing Remote Access Controller Components.”